DK

Description:
Combination of FRL service units by means of switch-on valves, porting blocks and branch plates
as well as end and direction plates.

Switch-on_valve:
3-port/2-way ball valve with full orifice size, lockable by padlock. The valve consists of a brass ball
mounted in PTFE.

Porting_block:
Further devices or pressure outlet ports can be mounted on the porting block.
The full nominal size remains.

Branch_plate: provides tap for unlubricated compressed air

End_plate:
All FRL units are equipped with connection threads. End plates are needed to...
- enlarge or reduce the thread on the FRL unit
- permit easier removal of the FRL unit from fixed piping.

Direction_plate:
enables
- FRL unit mounting shifted by 90°
- combination of FRL units with different sizes

Mounting_bracket:
For side mounting on devices with threaded holes (B). Two mounting brackets are necessary for one
FRL unit. Alternatively, an FRL unit can either be directly mounted via the threaded holes or by the
means of a mounting bracket at the pressure regulator.