+49 2102 7339021

In-Line pressure regulator with factory-set outlet pressure, reducing from e.g. 15 bar to 5 bar.
Pressure stability with different flow rates is guaranteed with an outlet pressure tolerance of ±20%.

Benefits:
- Higher safety through lower pressure. Tools and equipment protected against pressure damages.
- Cost reduction through substantially reduced air consumption. Longer service life.
- Noise reduction for tools.

Media:
compressed air, non-corrosive gases or liquids (model 239)

Supply pressure: max. 18 bar, 10 bar for model 239

Adjustment:
Select the pressure regulator according to the desired outlet pressure.
The outlet pressure cannot be subsequently adjusted.
This safeguards against tampering.

Relieving function:
non-relieving, therefore not recommended for applications such as nailers

Temperature range:
0 °C to 60 °C / 32 °F to 140 °F,
for appropriately conditioned compressed air down to -30 °C / -22 °F

Body: cadmium-plated steel, nickel-plated brass at model 239
Elastomer: NBR/Buna-N, optionally FKM