R23

Description:
Inline pressure regulator with factory-set outlet pressure, reducing from e.g. 15 bar to 5 bar.
Pressure stability with different flow rates is guaranteed with an outlet pressure tolerance of ±20%.

Benefits:
Higher safety through lower pressure. Tools and equipment protected against pressure damages.
Cost reduction through substantially reduced air consumption. Longer service life.
Noise reduction for tools.

Media: compressed air, non-corrosive gases or liquids (R23-W)
Supply pressure: max. 18 bar, 10 bar for R23-W

Adjustment:
Select the pressure regulator according to the desired outlet pressure.
The outlet pressure cannot be subsequently adjusted. This safeguards against tampering.

Relieving function: non-relieving, therefore not recommended for applications such as nailers
Temperature range: 0 °C to 60 °C / 32 °F to 140 °F, for appropriately conditioned compressed air down to -30 °C / -22 °F
Body: cadmium-plated steel, nickel-plated brass at R23-W
Elastomer: NBR/Buna-N, optionally FKM