DBC-N

Description:
Diaphragm back pressure regulators protect pneumatic devices
against overpressure. If the pressure exceeds the setpoint, the
pressure valve exhausts to the atmosphere until the pressure
level is below the setpoint. It is advisable to select the pressure
range as near as possible to the maximum setpoint.

Media: compressed air or non-corrosive gases

Overpressure: max. 6 bar

Adjustment:
by handwheel with locknut for DBC-04
by hexagonal spindle (spanner size 24 mm) with locknut for DBC-08 / -16

Gauge_port:
G1/4 for operating pressure, on both sides of the body,
connection parts required

Mounting_position: any

Temperature_range: -20 °C to 60 °C / -4 °F to 140 °F

Body: aluminium
Diaphragm: NBR/Buna-N with PTFE coating
O-rings: NBR/Buna-N, optionally FKM or EPDM
Inner_valve: brass