BM

Filter pressure regulator made of solid brass, with bowl without sight glass. The control system is a membrane.

Media:
compressed air, non-corrosive gases or liquids

Supply pressure:
max. 50 bar (without drain)

Relieving function:
relieving, optionally non-relieving

Adjustment:
by black plastic knob at size G1/4
by T-handle with locknut at G1/2

Gauge port:
G1/4 on both sides of the body, one screw plug supplied

Filter element:
50 µm, optionally 5 µm, made of stainless steel

Bowl:
stainless steel version without sight glass

Drainage:
screw plug as standard, optionally manual drain (max. 30 bar) or automatic drain (max. 16 bar)

Temperature range:
0 °C to 80 °C / 32 °F to 176 °F for FKM
0 °C to 130 °C / 32 °F to 266 °F for high temperature version
for appropriately conditioned compressed air down to -20 °C / -4 °F
or low temperature version down to -40 °C/ -40 °F

Body: brass
Bowl: stainless steel 316L / material no. 1.4404
Diaphragm: NBR/Buna-N with PTFE coating
O-rings: FKM
Knob: plastic at sizes G1/4, brass at G1/2
Inner valve: brass and plastic (not at option X54)