RH10

For outlet pressures up to 15 bar the regulator has a diaphragm,
for higher outlets a piston. A sintered bronze filter at the inlet
port protects against contamination.

Media: compressed air or non-corrosive gases

Supply pressure: max. 220 bar

Adjustment:
- RH10-02 by black plastic knob
- all others by T-handle with locknut

Gauge port:
All regulators are equipped with both one supply pressure gauge and
one outlet pressure gauge.

Relief valve: prevents from overpressure, see chart

Compensation:
All regulators are equipped with supply pressure variation compensation,
so that a change in supply
pressure has no effect on the outlet pressure's
stability.

Mounting position: any

Temperature range: -20 °C to 60 °C / -4 °F to 140 °F

Body: brass, nickel-plated at RH10-02
Inlet filter: sintered bronze
Piston: brass at RH10-02
O-rings: EPDM or FPM, dependent on media
Valve seat: nylon
Diaphragm: stainless steel at RH10-02, NBR/Buna-N at all others