RN

Description:
Lever mechanism allows the diaphragm regulator to operate as a
proportional converter with pneumatic outlet signal. Moving the
lever by 141° (RN1) or 32° (RN2) allows full-range adjustment of
regulated pressure, e.g. from 0 to 7 bar.

Media: compressed air or non-corrosive gases

Supply_pressure:
RN1 max. 16 bar,
RN2 max. 10 bar

Adjustment:
RN1 by side lever,
RN2 by vertical lever

RN1 0…141° angle range,
RN2 2x 0…32° angle range to each side

RN1 without spring reset,
RN2 with spring reset in centre position

Relieving_function: relieving
Gauge_port: G1/8 on both sides of the body, screw plugs supplied
Mounting_position: any

Temperature_range:
RN1 -40 °C to 80 °C / -40 °F to 176 °F
RN2 -20 °C to 70 °C / -4 °F to 158 °F

Body:
RN1 nickel-plated brass,
RN2 anodized aluminium
Elastomer: NBR/Buna-N