R300

Diaphragm pressure regulator of small and light design with high flow capacity.
It provides sensitive adjustment accurate to 2 mbar.

Media: compressed air or non-corrosive gases
Supply pressure: max. 18 bar

Accuracy:
setting accuracy = < 2 mbar
response sensitivity = < 2 mbar

Air consumption: max. 3 l/min, subject to outlet pressure
Adjustment: by handwheel with locknut
Relieving function: relieving
Relief capacity: 55 l/min at 1.5 bar outlet and 0.35 bar overpressure above setpoint
Gauge port: G1/8 on both sides of the body, screw plugs supplied
Mounting position: any

Temperature range:
0 °C to 90 °C / 32 °F to 194 °F,
for appropriately conditioned compressed air down to -40 °C / -40 °F

Body: aluminium die-cast
Inner valve: Brass and galvanized steel
Elastomer: NBR/Buna-N, optionally FKM