AP

Description:
The air amplifier compresses air or nitrogen from a standard
pressure of 10 bar max. to the desired outlet pressure
of 40 bar max. This is realised by cylinders with different
ratios - simple, safe and economical. No electrical installation
is required and there is no energy consumption once the final
pressure has been reached. Service life 3 million cycles, full
load operation 12 min max. per hour.

Media: lubricated, unlubricated and 50 µm filtered compressed air or nitrogen

Amplifier_station:
The pressure booster has an additional tank, pressure regulator,
filter, gauge, relief valve and switch-on valve. Pressure pulsation
rates are low, air consumption peaks are compensated and the
operating pressure can be adjusted.

Drive_pressure_PA: system air to drive the air amplifier, 2…10 bar
Supply_pressure_P1: max. 12 bar, for instance nitrogen or the system air
Outlet_pressure_P2: amplified outlet or operating pressure of 20 bar to 40 bar maximum

Temperature_range: 0 °C to 60 °C / 32 °F to 140 °F

Sound_level: max. 79 dB (A)

Body: aluminium
Seals: NBR/Buna-N
Tank: coated steel, SST at AP40-0050