PIO

The pneumatic proportional pressure regulator controls the outlet pressure in a complete closed loop servo system in proportion to an digital IO-Link command signal. By using the IO-Link Master the valve can be adapted to special applications and optimize the the response time, the overshoot and the precision of the valve. The valve has no constant bleed. At absence of input signal or supply voltage the pressure of the valve stands.

Media: dry, lubricated, unlubricated and 50 μm filtered compr. air or non-corrosive gases
Command signal: Digital command signal in 1 mbar steps (0-10000 = 0-10 bar),
Control: IO-Link (Class A)
Hysteresis: 1,5% FS, Supply voltage 24 VDC
Software: IODD (necessary)
Linearity: 1,5% FS, Electrical connector M12, 5-pin
Repeatability: 1,5% FS, Protection class IP65

Minimum Command signal: 0,5% FS, Current consumption 180 mA
Minimum Outlet Pressure: 1,0% FS, Power consumption 3,8 W (< 1W if regulated)

Temperature range: 0-60 °C Media and Ambient
Body: aluminium
Inner valve: POM (Polyacetal)
Elastomer: NBR
Mounting position: any, preferably perpendicular