R116

Ideal for continuous high-capacity requirements where reduced pressure
must be held constant over wide variations in flow.
The booster is equipped with a diaphragm.
Transmission ratio 1 to 1 (pilot pressure to outlet pressure).

Media: compressed air or non-corrosive gases

Mounting position: any
Supply pressure: max. 28 bar
Ratio: 1:1
Pilot pressure: max. 18 bar
Outlet pressure: 0.2 ... 18 bar
Air consumption: without constant bleed
Relieving function: 6500 l/min at 6 bar, see diagram

Ports: inlet / outlet = see chart

exhaust:
G1/2 (up to overall size G1/2),
G3/4 (from size G3/4 on)

gauge P2: G1/4
gauge P1: G1/8 (from size G3/4 on)

Temperature range: -18 °C to 70 °C / 0 °F to 158 °F

Body: zinc die-cast
Inner valve: brass
Elastomer: NBR/Buna-N
Bottom screw: nylon, glass fiber reinforce, ... G1 1/2 and G2