FH

Description:
Filter made of plastic for compressed air, vacuum, non-corrosive
gases or liquids. The flow on the filter elements passes from outside
to inside. They are largely corrosion-resistant and feature excellent
chemical stability. Direct exposure of the filters to direct sunlight
must be avoided. Optionally available with EPDM elastomers by the FDA.

Filter_element:
5 µm, 35 µm and 80 µm made of PE,
50 µm, 100 µm and 300 µm made of stainless steel

Bowl:
made of transparent Grilamid TR55, three different sizes, screwabel,
without drain

Drainage:
without drain, as no water separation occurs with compressed air

Operating_pressure:
max. 10 bar at 20 °C / 68 °F

Differential_pressure:
max. 0.7 bar

Temperature_range:
5 °C to 50 °C / 41 °F to 122 °F

Cleaning:
with lukewarm water and standard rinsing agent

Body: polypropylene
Filter_element: polyethylene, optionally stainless steel
Bowl: polyester, transparent
Elastomer: NBR/Buna-N, optionally FKM or EPDM (FDA)